Q1 FY27 earnings call · August 10, 2026

Bharat Forge Q1 FY27 Earnings Call: Raises Rs. 2,500 Cr for Expansion, Defense Order Book at Record Rs. 11,196 Cr (BHARATFORG)

Cofacto ResearchPublished August 10, 20267 min read
Quick summary

Bharat Forge Ltd held its Q1 FY27 earnings call on August 10, 2026. Here's a quick read of what management said — performance, strategy, and the outlook ahead.

Headline performance in a challenging quarter

  • Standalone revenue of Rs.2,347 Cr — up 11.5% YoY in Q1 FY 2026-2027, with EBITDA of Rs.614 Cr (+4.5% YoY) and margin of 26.2%.
  • Normalized EBITDA margin of ~28% — reported margin was impacted by ~160 bps from higher energy, input costs, and logistics; the normalized figure excludes these headwinds.
  • Consolidated revenue of Rs.4,640 Cr — up 18.7% YoY for Q1 FY 2026-2027; consolidated EBITDA was Rs.752 Cr (+10.3% YoY) with margin of 16.2%.
  • Net debt-to-equity of 0.45 — balance sheet remains conservative despite ongoing growth investments.
  • New orders booked: forging Rs.522 Cr, defense Rs.681 Cr, ferrous casting ~Rs.150 Cr — Q1 FY 2026-2027 order intake supports a robust pipeline across segments.
  • European business revenue of Rs.1,074 Cr — positive EBITDA of Rs.30 Cr (~3% margin) in Q1 FY 2026-2027; restructuring of BFCDP (German steel) is on track.
  • US business revenue of Rs.461 Cr — EBITDA loss of Rs.4 Cr in Q1 FY 2026-2027 due to a major breakdown of two presses in steel operations; recovery expected in Q2 FY 2026-2027.

Record defense order book and new naval capabilities

  • Defense order book of Rs.11,196 Cr — at end-Q1 FY 2026-2027, underpinned by strong Q1 order intake of Rs.681 Cr; KSSL (defense subsidiary) margins guided at 22-23% steady-state.
  • Jaisuri facility entering serial production in FY 2026-2027 — management expects this facility to play a major role in ATAGS and CQB carbine deliveries, with H2 FY 2026-2027 driven more robustly by resumed exports and domestic defense orders.
  • Marine gas turbine generator (1.25 to >25 MW) entering testing — Bharat Forge developed this multi-fuel system in-house; the Indian Navy's plan for 140 new ships dramatically increases content per vessel, and the company secured an MRO contract for turbines with the Navy.
  • Aerospace revenue of ~Rs.400 Cr — management targets doubling this over the next two years (by FY 2028-2029), supported by record wins in FY 2025-2026 and a new ring mill in Baramati expected to start in Q4 FY 2026-2027.
  • Naval value stream expanding — from shafting/propellers to power generation and fight-side systems; the naval turbine facility will be located near a naval shipyard with only small incremental investments required.
  • ATAG approvals delayed by a few weeks — management cited a procedural issue, with the order and product ready; India-linked business growth guidance for FY 2026-2027 was revised from 25% to 20-25%.

Rs.2,500 Cr fundraise to finance large-scale expansion

  • Fundraise of up to Rs.2,500 Cr — announced for growth capex in large engine, power gen, semiconductor components, aerospace, and an energetics plant in Andhra Pradesh; capex to be completed over the next 18 months.
  • Organic capex of ~Rs.1,800 Cr for FY 2026-2027 — allocated to forging, machining, heat treatment, and ring-rolling assets in India, plus a separate energetics plant in Andhra Pradesh; asset turnover guided above 1.5x.
  • Odisha mega project awaiting environmental and forest clearances — management expects approvals by the end of FY 2026-2027; once received, the first plant is expected to be operational in about two and a half years. A portion of the fundraising will finance this multimodal facility for large aerospace components and other sectors.
  • AP energetics plant license not yet received — the application is submitted and the process is ongoing; the facility is being set up as a modular plant for shell manufacturing and filling, with current empty shell capacity described as "very large" but mix-dependent.
  • Balance sheet buffer of at least Rs.2,000 Cr cash — management cited maintaining a conservative balance sheet and accelerating growth, including M&A opportunities like JSA and K-Drive, as the rationale for the fund raise.

One-time provision, CDP closure, and US recovery path

  • One-time restructuring provision of Rs.330 Cr — booked in Q1 FY 2026-2027 for manpower redundancy at BFCDP; payout is spread over the next 6-12 months, and management confirmed no additional provisions are expected in Q3 or Q4 FY 2026-2027.
  • CDP (German steel) closure between Q3 FY 2027-2028 — business will shift to India at or before that time; a ~$30 million impact (non-cash, cash outflow >12 months) has been taken, with completion estimated by end of calendar 2027.
  • US operations: normalized EBITDA margins targeted for FY 2027-2028 — steel guided at ~12% and aluminum at 15-16%; near-term goal is to avoid cash losses until the US aluminum tariff of 50% on Canadian raw material and 10-15% on component imports resolves.
  • US EBITDA loss of Rs.4 Cr in Q1 FY 2026-2027 — caused by a major maintenance breakdown in the steel forging business, leading to no production for nearly three months; revenue was higher than prior periods but EBITDA turned negative.
  • Q2 FY 2026-2027 margin trajectory expected to improve — driven by indirect price increases, higher volumes, and recovery from the one-time Q1 impact; improvement will be gradual throughout the year, not a one-time jump.
  • Manpower normalcy at 70-75% of pre-disruption levels — some migrant/casual labor has yet to return; fuel situation is under control, though Maharashtra faces an energy price hike (no specific figure provided).
  • European business margin of ~3% — Q1 FY 2026-2027 EBITDA margin remains low; restructuring is expected to improve profitability over time.

EV, K-Drive, data center, and semiconductor build-out

  • EV opportunity: limited success to date — management hinted at future developments within 3-6 months (by Q3/Q4 FY 2026-2027); no specific commitments were disclosed.
  • K-Drive (EV axles for LCVs/LMCVs) expected to grow — in both scale and margins; a new plant is planned in northern India for a key customer (timeline unspecified).
  • Semiconductor business targeting $30-40M revenue organically — over the next two years (by FY 2028-2029), with potential to double after setting up machining facilities.
  • Data center (energy) business expected to double over four years — management stated the business "expected to double over the next four years" (by FY 2030-2031), with long-term contracts already in place.
  • India manufacturing operations targeting 15% CAGR over five years — management guided a "15% CAGR over the next five years" (FY 2027-2032), driven by both auto (new products like castings, K-Drive) and non-auto segments.
  • Ferrous casting business on track to triple revenue since acquisition — by the end of FY 2026-2027; JS Autocast saw revenue +20% and EBITDA +30% YoY in Q1 FY 2026-2027.

FY26-27 outlook, defense exports, and key risks

  • FY 2026-2027 expected to be a "very good year" — management cited strong business sentiment in North America driven by higher corporate CAPEX boosting demand for construction, mining, data center, and power systems.
  • India-linked business growth guidance revised to 20-25% for FY 2026-2027 — down from 25% due to a procedural delay in ATAG approvals; order and product are ready.
  • FY 2027-2028 expected to be "a remarkably strong year" — management stated momentum seen in recent years should continue across all segments and geographies, with operating margin levers kicking in as growth continues.
  • Defense export opportunity requires government support — management noted the opportunity is large but requires "significant hand-holding and support from the government, including soft loans and EXIM financing, as exemplified by South Korea"; management observed that the Indian government is beginning to look at the defense industry's geopolitical ramifications seriously.
  • Traditional business growth in engines and crankshafts — management sees potential in high precision parts, power gen, semiconductors, aerospace, large engines, marine, defense, and naval as growth drivers.
  • Key risks: US aluminum tariff of 50% on Canadian raw material — creates headwinds for US operations at 10-15% margins; supply challenges from steel-sector labor issues and energy disruptions linked to the Iran war impacted Q1 FY 2026-2027 domestic CV and PV growth.
  • M&A opportunities in India under evaluation — management declined to disclose specific product areas or technologies under consideration.

Ask about this

Ask Cofacto a question about this call. Answers cite filings and company data.

Companies on this page

Related

Share on X · LinkedIn · WhatsApp

Disclaimer: This earnings call summary is published for educational and informational purposes only. It is not investment advice, not a recommendation to buy, sell or hold any security.